Hello guest
Your basket is empty

NEW Inverto Unicable II 6099 8 Way dSCR + Terr Multiswitch W/B

Code: MSW/INV/DSCR6099
Cascadable 8 Way dSCR Sky Q Switch & Terrestrial Multiswitch. Quattro or Wideband LNB for two satellites.
This Multiswitch unit connects to a Quattro or Wideband LNBs and offers a terrestrial input port to connect a terrestrial antenna and enable the distribution of satellite TV as well as DTT/DAB broadcasts at MDU/IRS installations.
A manual switch selects whether the satellite inputs connect to a Quattro LNB or up to two Wideband LNBs for receiving up to two full satellite broadcasts. The loop-through trunk ports can be connected to cascade additional Multiswitch units.
The DC-input port of the Multiswitch unit powers the trunk lines which power the connected LNB and the built-in Terrestrial amplifier of the unit and of any other cascaded units. The Trunk power LED will turn green when the Trunk lines are powered.
The output ports are powered by the connected STBs enabling super low power consumption from the trunk lines and powering as many cascaded switches as possible using a single power supply unit. If a connected STB is not able to power its respective port, a power inserter can be utilized.
Each of the eight STB output ports is compatible with either Sky Q, Sky+ HD or Sky+ STB models, delivers 16 User Bands and features a Port status LED indicating its operational mode:
- Solid green = Legacy mode (e.g. Sky+ STB).
- Blinking green = dSCR or SatCR mode (e.g. Sky Q or Sky+ HD STBs).
- Off = no voltage detected on the port (only terrestrial signal available on the port)
All the eight STB output ports combine a unity-gain equalized Terrestrial input signal.
Technical specifications
Frequency range: satellite Quattro LNB: 950 MHz ~ 2150MHz
Wideband LNB: 290 MHz ~ 2350MHz
Frequency range: terrestrial VHF 174-230 MHz
UHF 470-790 MHz
Inputs 4x Satellite IF inputs:
From 1x Quattro LNB or From up to 2x Wideband LNBs
1 x DTT/DAB input from Terrestrial antenna
Outputs 4 Satellite IF + 1 TERR
8 x Sky dSCR (16 UBs) / SatCR / Legacy
auto-detect ports with combined Terrestrial
Input power range -34 dBm to -4 dBm (74 dBuV to 104 dBuV)
Output signal level (AGC) -25 dBm (83 dBμV) ±2dB
RF isolation: satellite/terretsrial (input) 30 dB min.
RF isolation: satellite/satellite (input) 30 dB min.
RF isolation: satellite ch/ch (UBs, output) 30 dB min.
Loop-through loss: satellite
4 dB max.
Loop-through loss: terrestrial 0 ±1 dB gain
Gain: Unicable II™ (dCSS) output (out of AGC) >25 dB
Gain: terrestrial signal 0 ~ 5 dB
Integrated phase noise 1.5 degrees max.
Control protocols Sky dSCR (Sky Q), SatCR (Sky+), Legacy 13 V/18 V + 0 kHz/22 kHz, DiSEqC1.x/DiSEqC2.0, EN50494/EN50607
Legacy port switching V/L => 13 V/0 kHz , V/H => 13 V/22 kHz
H/L => 18 V/0 kHz , H/H => 18 V/22 kHz
Input/Output impedance 75 Ω (F-type)
Input/Output VSWR 2.5 : 1
LNB power supply 500 mA max. @ 18 VDC
Power consumption 1100 mA @ 19 VDC (8x ports with 16 active UBs each, no LNB load)
Working temperature -20 °C ~ +50 °C
IP protection IP54
Product dimensions (W x D x H) 21 cm x 14.6 cm x 3.7 cm
Weight 550 g

Also in New products

Our site uses cookies. For more information, see our cookie policy. Accept cookies and close
Reject cookies Manage settings