Hello guest
Your basket is empty
Inner Conductor : To be copper 
Diameter of Inner Conductor : 0.65 +/- 0.02 mm 
Outer Braid / Tape : No dissimilar metals except the foil 
may be aluminium and the braid copper and 
where the foil is aluminium the copper braid 
must be tin plated 0.75 microns +/- 0.25 
Diameter of outer Conductor : Not less than 3.5 mm 
External Diameter of 
each Sheath : 4.70 +/- 0.2 mm 
Separating Web : To be minimal such that on separation of 
the two cores an equal amount of outer 
sheath is left on both cores. Note the overall 
diameter of each core should be within the 
above limit. 
Bending Radius : 35 mm 
Flexing Radius : 75 mm 

Products in this category: